Normales Thema PHILIPS FIRMWARE UPGRADE PROCEDURE VIA RECOVERING (Gelesen: 817 mal)
Andy
Forum Administrator
*****
Offline



Beiträge: 1316
Standort: World of Tel-O-Fax
Mitglied seit: 01.12.1999
PHILIPS FIRMWARE UPGRADE PROCEDURE VIA RECOVERING
10.06.2009 um 13:28:51
Beitrag drucken  
To upgrade from firmware x.x to 2xx, and vice versa, you must use the “Recovering tool”. Follow this procedure. Note: the device must be running boot code v0.69d.0 before you begin. This can be checked in the “Status” page of Advanced set-up. To upgrade the bootcode see “BOOTCODE UPGRADE PROCEDURE”.

1. Press the reset button while powering on device and release after 2 seconds. Immediately press the reset button 3 times. The WLAN and PPP LED’s will flash on/off simultaneously to indicate the device is in recovery mode

2. Enter (Sie müssen sich Einloggen oder Registrieren um Multimediadateien oder Links zu sehen). , to enter the "Recovering tool". Note in recovery mode the device uses the default IP address (192.168.2.1).

3. Select Target: runtime code, and enter the full path and filename of the firmware. E.g. C:/My Documents/ARV4518HW-B-17-FW2_02_9.bin. Alternatively you can use the “Browse” button to browse to the location of the file.

4. Click "APPLY" to process upgrade. After clicking “APPLY” be sure to read all warning messages carefully before proceeding.

5. After the firmware has loaded it will return to the recovering tool. Click "Reset", then "Reboot" to restart device with the new firmware.

6. To check the upgrade was successfull check the runtime code version in the “Status” page of Advanced Set-up.
  

We would like to inform you ! Enjoy our forum.
Zum Seitenanfang
IP gespeichert
 
Bookmarks: del.icio.us Digg Facebook Google Google+ Linked in reddit StumbleUpon Twitter